SUPREME POWER INTELLIGENT HIGH FREQUENCY SWITCHING DC POWER BANKS
Model # SP GZCXDW-5
These units can be used in operating applications where voltage is 500KV or lower
Supreme  Power  Intelligent High  Frequency  Switching  DC Power Banks were developed over several years research in practical applications testing of DC power systems for creation of this improved unattended power system.

New improvements include :Dc Switching unit
High Frequency On-Off
Micro-Computer Communications  
Fully Automated
Low maintaince
Uncomplicated design
Replacement of power module even on "Hot Lines"
Designed to remotely control measurement of important electric functions and communicate to units by computer interfaces.
Easy to operate
Complete module replacement and replacement by one person
(Pull out module and insert new one)
Complete computer monitoring and control from remote location
Technologically advanced  automation
DC Switching unit
Composed of:

 AC In-put Unit
Charging Unit
Power Out-Put Unit
Voltage regulating unit
Insulation monitoring Unit
Storage battery
Faulty battery alert
Faulty Check Unit alert
Micro Processor Intellegent Monitoring Unit

Examples of LED Light Touch Screen Control Panel Below

DC Touch Control  Panel-LED Lighted  
System state: faulty Next  Fuction/Page
Quit
Composite Busbar 1st: 245.5 V
Control Busbar 1st: :221.0 V Main Window
Battery 1st: 245.5 V
Battery 1st: -21.0 A Information Inquiry
    System setting
Battery 1st: Floating Charge   System Control

DC Touch Control  Panel-LED Lighted    
AC Parameter DC Parameter Quit
Module Parameter Current Faulty Main Window
Information
Insulation Monitoring History Faulty Information Inquiry
System Setting System Control System Setting
Battery Logging Discharge Metering System Control

Actual Picture of LED Touch Screen Control Panel

LED Touch Screen Control Panel
DC LED Control Panel Information:

Storage Battery in separate compartment from all components
2 circuited AC In-Puts for back-up if one is faulty or load is high
Automatically switchs to spare AC In-Put
Distributs power evenly from on circuit to the other
Charging  unit and Power Out-Put has switch power module and N=1 redundancy design allocated
Charging  unit and Power Out-Put  independently circuited  and set for safety, security and reliabity
Monitoring unit consistes of high performance module with concentrated controller and Lighted LED Touch Control Screen.
Working states, parameters, signals  and data  of the monitoring system  are displayed, shown and detected through RS232 or RS485 interface.
Climate Conditions/ Working Enviroment/ Limitations:

Cautions:
Use no more than 3,000 meters above sea level
Temperature ranges: -10 C to ~+ 15 C
Relative humidy NOT HIGHER than 90%
Keep from  vibrations, shock and strong electromagnetic feilds
Do not use in areas of heavy dirt, explosive fumes or material, corrisive liquids, or air born corrisive metal powders
Place on level surface
Vertical gradient of no more than 5 degrees

 See More Technical Data Here!